Announcement

Collapse
No announcement yet.

Rims and Tires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rims and Tires

    Right now my race rims are 13x8 Rota RB's. They are WAYYY heavier than the stock wheels, but thats a price i am paying for the xtra 2" of width.I Am slightly rubbing the inner edge of the front bumper. Not a huge problem, and its only lock to lock turning, but it does. What size width should I get with a 16'' -17'' diameter.Or any good wheel suggestions?
    Note: I was going to use the race rims as street rims when the rubber ran out, but with rubbing, it's not going to happen, so this thread is for street rims, not race rims.
    BRP #1 NA Coldside ever
    105/65mm
    Forged 9:1 pistons/rods ported/polished head
    Stock/Modified ECU for 8000rpm rev limit ELF fuel management
    13x8 Rota RB V710's.
    ...and much more
Working...
X