Announcement

Collapse
No announcement yet.

Hello world

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello world

    I bought a used FFS off craigslist, out of state none the less. Thank God it was not a scam and 99% of the kit arrived as expected. The seller included a pillar gauge pod and I plan to install that, wideband, and new cat, before anything else. The kit is pre - timing card, and I plan to use my Bipes for now. My intake has only one injector, Tom said it's probably 500cc. It's located on the front of the intake and there appears to be a second location for a 6th injector on the side. I like the idea of not having to cut the rail web with only the 5th injector, but is there a strong argument for buying new 5th and 6th injectors? I plan to only run the stock pulley. Thanks!
    Attached Files
    '95 PEP 105k
    low pros and roll bar by PO
    timing belt and sub by me

  • #2
    For the stock 105mm pulley the one injector should be just fine.
    '00 Coldside FFSC 130mm pulley @ 18.5psi. on E85. OBX header, Goodwin Midpipe, Tein Flex, Koyo Rad, Etc.

    Comment


    • #3
      Thanks Pat for your reply.
      '95 PEP 105k
      low pros and roll bar by PO
      timing belt and sub by me

      Comment

      Working...
      X